HOME > Product > Optical Senser > For Color Senser


For Optical Disk

For Display

For Mobile Products

For OLED

For Optical Sensor

 Si Photo Diode

 Photo IC

 Color Sensor

 Ambient Light Sensor

 Si Foundry

 MBE
Model No.
CPS289AT
Product name
RGB Color Sensor
Overview
CPS289AT is RGB color sensor with three photo-diodes, Red (R),
Green (G), and Blue (B).
CPS289AT is the RGB color sensor which contained the Gain control
function.( independent of each R, G, and B channel )
This sensor can convert RGB light into an Analog voltage.
By adoption of small and thin package (3.5mm x 3.0mm x 0.7mm),
it is the best for small module.
Features
* RGB 3ch Analog voltage output
* Photo detector size 1.37mm x 1.37mm
   RGB 12pcs x 12pcs Array (105um x 105um)
* Gain change function built-in. Four-step Gain adjustment.
* Compact COB package (3.5mm x 3.0mm x 0.7mm,COB-12PIN)
* Built-in infra-red cut filter
* Reflow soldering applicable
Applications
* Color detection.
* Light quantity detection
* Color temperature adjustment
Status
Ready for sample and mass production order
Contact
Model No.
CPS298AL
Product name
I2C compatible RGB Color Sensor
Overview
CPS298AL is a color sensor that supports I2C interface.
The sensor has sensitivity at Red(λ=610nm), Green(λ=540nm),
and Blue(λ=460nm) respectively,
and outputs detection results in 16 bit digital values.
Features
* Support I2C interface
* Support sequential and continuous measurement of Red/Green/Blue/Infra-red
* Adjustable sensitivity by setting of integral time (1 - 65535)
* Compact COB package (2.4mm x 2.0mm x 0.95mm, COB-8PIN)
* Built-in infra-red cut filter
* Reflow soldering applicable
Applications
* Color detection.
* Light quantity detection
* Color temperature adjustment
Status
Under development (Engineering sample supply is possible)
Contact
Model No.
CPS333AT
Product name
RGB Color Sensor
Overview
CPS333AT is a color sensor molded into a chip on board package having a 3-channel (RGB) photodiode sensitive to the Red, Green and Blue regions of the spectrum.
By adoption of small and thin package (3.5mm x 3.0mm x 0.7mm), it is the best for small module.
Features
* RGB 3ch Analog current output
* High sensitivity 3channel(RGB) photodiode
* Photo detector size 1.39mm x 1.39mm    RGB 12pcs x 12pcs
    Array (100um x 100um)
* Compact package(3.5mm x 3.0mm x 0.7mm COB-12PIN)
* GOC(Glass On Chip) package
* Built-in infra-red cut filter
* Reflow soldering applicable
Applications
* Color detection.
* Light quantity detection
* Color temperature adjustment
Status
Under development (Engineering sample supply is possible)
Contact